• pro audio Line Array System
  • pro audio pro speaker
  •  Professional Active Speaker
  • pro audio pa speaker
  • pro audio Amplifier
  • Guitar Amplifier
  • pro audio Loudspeaker
  • pro Peripheral Equipment
  • pro audio accessories

HomePage >Paaudio Products

Power Amplifier (GX3)

Information:

    power amplifier (GX3) provide extensive protection features such as Overheat short currents, DC protection, zero current, clip limiter, soft start

Description:

    
SPECIFICATIONS
Model£ºGX3
  STEREO    MODE    (Both    Channels    Driven)
8    ohms ¡¡
 FTC20Hz -20kHz,0.1%THD 200W
4    ohms ¡¡
FTC20Hz -20kHz,0.1%THD 400W
2    ohms ¡¡
 EIA 1kHz, 1%THD 550 W
  BRIDGE    MONO    MODE
8    ohms ¡¡
  FTC20 Hz -20    kHz, 0.1%THD 800W
4    ohms ¡¡
 EIA 1kHz,    1%THD 1500W
Signal to Noise, 20 Hz-20kHz 100dB
  ALL    MODELS
Distortion    (Typical) ¡¡
20 Hz -20kHz: 10dB below rated power Less    than    0.03%    THD,    4    and    8    ohms
1.0kHz and below: full rated power Less    than    0.03%    THD,    4    and    8    ohms
Frequency    Response 20    Hz-20    kHz,    ¡À1    dB
-3    dB    points:    5    Hz    -    50    kHz
Damping    Factor, 1kHz and    below Greater    than    300    at    8    ohms
Input    Impedance 10k    ohms    unbalanced,    20k    ohms    balanced
Input    Clipping 10    Vrms    (+22    dB)
Cooling Continuously    variable-speed    fan,    rear-to-front    air    flow
Connectors,    each    channel Input:    Active    balanced;    barrier    strip,    XLR    and    1/4"    (6.3mm)
TRS    tip    and    XLR    (pin    2    positive)
Output:    touch-proof    binding    posts    and    Neutrik®    Speakon®
Controls Front:    AC    switch,    Ch.    1    and    Ch.    2    gain    knobs
Rear:    10-position    DIP    switch
Indicators Power-On:    Green    LED
Signal:    Yellow    LED    (1    per    channel)
Clip:    Red    LED    (1    per    channel)
Amplifier Protection Stable    into    reactive    or    mismatched    loads
Load Protection On/off    muting,    AC    coupling    ,    triac    crowbar    ,    on    each    channel)
Power Requirements 100,    120,    230    VAC,    50-60    Hz
Dimensions 2U
GX3 power amplifier provide extensive protection features such as Overheat short currents, DC protection, zero current, clip limiter, soft start

[Click to back]